Paul Wootton
Well-Known Member
- Posts
- 188
- Location
- S.Wales
Can anyone suggest the best steel rear bumper for the P38
P38 Rear Bumper
- Thread starter Paul Wootton
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,655
- Location
- Sud ouest France !
Good question. Interested on any views on this one..
RangeRoller dt
Well-Sprung Member
- Posts
- 14,410
- Location
- Trapped inside my head @ LZ asylum
The one with the winch capability.
Pull yourself out of the mud not further into it and weight distribution is a lot better.
Some cheapos look really crap once they are bolted on.
Pull yourself out of the mud not further into it and weight distribution is a lot better.
Some cheapos look really crap once they are bolted on.
brianp38dse
Well-Known Member
- Posts
- 20,093
- Location
- heathrow
cant say i have seen many about , couple on ebay that`s about it.
Paul Wootton
Well-Known Member
- Posts
- 188
- Location
- S.Wales
Totally agree with you about the advantage of a rear winch,any suggestions on a good bumper.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,410
- Location
- Trapped inside my head @ LZ asylum
Why do you want one?
OE one on my 95 is original and I’ve failed to destroy it
To put good anchor points on the rear would be a goodexcuse reason.
OE one on my 95 is original and I’ve failed to destroy it
To put good anchor points on the rear would be a good
- Posts
- 440
- Location
- Sevastopol, Crimea.
When I took my P38 to Russia I had a body shop remove the front and rear bumpers and had a steel scaffolding pipe cut and shaped and replaced the bumpers over them. Plus I have an agricultural towing hitch on the back. That has saved me on a few times as Russians cant drive for S"£t had 3 up my back at lights and they came off quite bad but only chipped the paint n the hitch. The other 2 occasions I was parked in a car park and they backed into me.... What a sorry site they looked, well shouldn't have just bought their licences as the Politizi found out. when they were saying it was my fault and the dash cam clearly showed i was parked and they ran into me!
- Posts
- 19,306
- Location
- Buckinghamshire, UK. ('95 DT)
The P38 already has a metal bumper under the plastic covering so that must be pretty damn solid by now. I went through about 3 tungsten drill bits doing my parking sensors, albeit cheap Chinese ones.
