p38 EKA

When i enter the EKA code should the indicators flash on both left and right turns of the key? as mine dose not... just on the left, and thats while im entering the setup section where i do 4 turns to the left to start then nothing flashes after that. Iv'e squirted some switch spray in tonight to try and loosen the micro switches a little and see if things get better tomorow.

Quite usual for flash on set-up only, then enter code..........otherwise indicators on each turn of key flatten battery further.

Thank you, makes sense now i look at it that way. wonder where this kind of information is hiding.