P38 dse problems!

Hi!
have a P38 diesel RR, The 2.5 bmw 6 cil......recently has problems with overheating.....tanks to all the forums i´ve seen the problem is solved........Changed everything,radiator, water pump,thermostat,etc......but was still overheating until I checked the viscous unit and Bualáa...taht was thw problem! Thanks! Gioes smooth now!!!

I had it plugged recently and three error codes came up:
133 Turbo pressure sensor
136 Flow Actuator
142 Needle elevation uptake ( I suspect this one was when my temp gauge was going up, so ignore this one)


Could the error 136 be relationed to the code 133? I think Ill change the turbo pressure sensor and then eliminate all de codes and start again! Any ideas?Has anyone got the codes to order the spares?....STC....?
(I took the car to plug it because sometimes when driving the car suddently stoped....if you where on a stop you had to turn it on again....but if you where on the move after a few seconds you had power again........it was happening one a day more ore less!!!)

Have another problem...the test book appears on the airconditioning panel after some time!!!

Any ideas!??????
Thanks!!!
Adal Trujillo

Hi Hadal,

Check your turbo hose, and air filter....

good luck

when you change the sensor and have the error codes cleared have the hevac plugged in to read the error codes then your have an idea whats wrong with the a/c.