p38 changing battery

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

roddy4

New Member
Posts
664
Location
banbury,oxfordshire
hi just wanted to know if there was any special precautions i should take when changing the 12 volt battery,i can keep 12 volts going through if necessary.
 
make sure you've got your radio and eka code and that they are correct. also make sure you keep the ignition key in your pocket and not in the car!!!! If you have a look in the owners manual there is the correct procedure for removing the battery. Think its 17 seconds after removing the ignition key that you've got to disconnect the battery.
 
make sure you've got your radio and eka code and that they are correct. also make sure you keep the ignition key in your pocket and not in the car!!!! If you have a look in the owners manual there is the correct procedure for removing the battery. Think its 17 seconds after removing the ignition key that you've got to disconnect the battery.
thankyou for that,i have no owners manual,and finding it hard to get one.
don't want to pay silly money for one either!
i do have rave tho.
 
You can get your handbook and loads of other stuff FOC from LandRover.com . Follow Owners, Servicing & Maintenance, Handbooks & Owners, Take me to the owners information website, or just take this shortcut to the TOPIx front page - TOPIx - TOPIx .
 
It is 17 seconds otherwise the car's back up alarm goes off. A tip is to remove the battery cover first and slightly loosen the earth lead. Switch the ignition on and off, nip round the front and pull the lead from the battery. The theory is that you should only need the radio code unless you leave it with no power too long. As said above, though you could leave 12V going through it all the time but be prepared for the alarm if the croc clip jumps off!
 
Back
Top