p38 4.6 base idle setting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
it doesnt have one 0 rpm basically complete idiot owned vehicle before and rarther than cure inlet air leaks removed the anti tamper plug and screwed in the air bleed, air leaks now fixed but now the stepper seams reach its limit before acheving idle which should be 720 give or take so rarther than guess there must be a procedure to set base idle ?
 
do you have a means of viewing the ecu data from the enjin?

(guessing here) you could try adjusting it and see what effect it has on the ecu data?
 
No problem,just adjust the bypass screw to give 15-30 steps at idle- engine hot all loads off.(Viewed on Testbook via live data.)
 
You must log in or register to reply here.

Similar threads

M
Code P6050
6 7 8
Replies
150
Views
7K
pwood999
pwood999
H
Base idle tuning - Disco 1 - V8 3.9L
Replies
5
Views
374
discool
discool
F
P38 DSE loss of power when driving
2
Replies
34
Views
2K
Tibo W
T
R
Advice on buying
Replies
9
Views
841
rockorover
R
M
Central lock
2 3 4
Replies
74
Views
2K
mikkre
M
Back
Top