pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
I was changing the PCV valve and managed to break one of the "t pieces" for the injector overflow return pipe
Freelander 1 OOoopps..
- Thread starter pardec
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GrumpyGel
Well-Known Member
- Posts
- 25,130
- Location
- Christchurch, New Zealand
oopsey daze.
Hope the bit had a part number stamped on it
Hope the bit had a part number stamped on it
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
Got the part ordered, £28:00 for 12" of rubber pipe
Madmustang
Well-Known Member
- Posts
- 1,630
- Location
- Castleford
Are you doing the brass conversion? I need to do that job do you just unscrew them and replace or is there a complicated process?
Arctic2
Well-Known Member
- Posts
- 2,446
- Location
- Westmidlands
Straight forward job remove the spring clips, pair of pliers pull the leak back T joints out of the injectors with the hose still connected then make a copy of them from the new hose and brass joints.
https://www.ebay.co.uk/itm/281404361492
Attachments
pardec
Active Member
- Posts
- 993
- Location
- South Manchester- North Devon
I would have done, but i didn't know about them until your post
Similar threads
Freelander 2 (LR2)
Turbo coolant return pipe
