discopaul
New Member
- Posts
- 571
- Location
- Chesterfield
Has any one got a Range Rover 3.5 EFI (Flaper) workshop manual that they can scan me the wireing diagram so that i can wire in my V8 into my 90?
ive got it turning over and a spart but the ECU is not wired in yet.
i have the wire loom that is on the engine and all im left with is a big conection for the ECU, smaller connector for the Air meter and the im left with a white male socket with the following color wires
2 white/red
2 white
Thick Brown
white Purple
so far ive had no luck at all with finding out what the wires need to go to, and im sure im not the first person to do this conversion!
ive got it turning over and a spart but the ECU is not wired in yet.
i have the wire loom that is on the engine and all im left with is a big conection for the ECU, smaller connector for the Air meter and the im left with a white male socket with the following color wires
2 white/red
2 white
Thick Brown
white Purple
so far ive had no luck at all with finding out what the wires need to go to, and im sure im not the first person to do this conversion!
