no lights on EAS switch or panel(TD6)

R

rogergoodier

New Member

Posts

30

• Sep 8, 2010

• #1

My RR screen says "Air Suspension Inopperable" and there are no lights on switch or idicator panel.Have had the battery off ,do I have to reset something.Only had it a week so not well versed in problems yet ,Anybody got a clue.

 

rasheed

Well-Known Member

Posts

1,815

Location

Bangladesh

• Sep 8, 2010

• #2

Take it back. You've had it a week, ask for your money back.

 

R

rogergoodier

New Member

Posts

30

• Sep 9, 2010

• #3

rasheed said:

Take it back. You've had it a week, ask for your money back.

Click to expand...

private sale!bought as seen

 

Datatek

Well-Known Member

Posts

45,024

Location

Near Poitiers SW France

• Sep 9, 2010

• #4

Did I read somewhere that you have to move the steering from full lock to full lock on the L322 to do a reset?

 

mattstevenson2005

Active Member

Posts

548

Location

Manchester UK

• Sep 9, 2010

• #5

That will only work if the light on the EAS hold height button is lit, if there is no lights on the panel at all I would check the fuses in the glove box

matt

 

R

rogergoodier

New Member

Posts

30

• Sep 9, 2010

• #6

fuse 27 now refitted,lights on .tried the steering lock theory ,still says auto sus inactive.also have beep about every minute when driving ,all doors shut and seat belt on .Is this beep to say Look at your screen instructions ?

 

Last edited: Sep 9, 2010

I

Invogue

New Member

Posts

62

Location

Lancashire

• Sep 9, 2010

• #7

Roger,

It will need the fault codes clearing probably before it restarts the EAS system. Mine did the same and the garage told me its the start of the air compressor letting go, I had it reset in May and its still okay now. I couldnt reset mine with the lock to lock trick

 

mattstevenson2005

Active Member

Posts

548

Location

Manchester UK

• Sep 9, 2010

• #8

Invogue said:

Roger,

It will need the fault codes clearing probably before it restarts the EAS system. Mine did the same and the garage told me its the start of the air compressor letting go, I had it reset in May and its still okay now. I couldnt reset mine with the lock to lock trick

Click to expand...

The lock to lock trick will only clear soft faults, like battery disconnection that type of thing... not major hard faults, for this you will need to connect it to a diagnostic system or EAS kicker type thing.

Matt

 

rasheed

Well-Known Member

Posts

1,815

Location

Bangladesh

• Sep 9, 2010

• #9

Bought as seen and private sale are not beyond the law and i think there are statutory protections that automatically cover any kind of bill of sale. You needn't necessarily take it back to him but if it ends up costing you to sort it, keep your receipts, spend some time googling consumer protection, fair trade, small claims and all that and hit 'im with it.

 

R

rogergoodier

New Member

Posts

30

• Sep 10, 2010

• #10

OK guys ,thanks for the info ,booked in on monday so watch this space

 

K

Kestrelbarn2003

New Member

Posts

4

• Apr 7, 2012

• #11

Hi Everyone, i had a similar fault on our 55 plate TD6 of no Air Suspension lights on and the car suspension says its lowered, when i first start it the lights come on and after a few seconds they all go off for good.
I have left it switched off for about 30 mins and then went to reset it by turning the wheel from lock to lock and its fixed it..all works ok..
Can anyone explain that...