new MK4 Range Rover firmware

mattstevenson2005 · Nov 20, 2010

Hi all

I have created a new Mk4 firmware with the 2010/2011 Range Rover splash screen. Below is a picture of what the new splash looks like in my Range Rover, compared to the picture of the 2010 range rover Check it out on my website: www.myrangerover.co.uk

Matt

rewmer · Nov 20, 2010

Nice work Matt, how did you get on with lights and your battery drain ?

mattstevenson2005 · Nov 20, 2010

rewmer said:
Nice work Matt, how did you get on with lights and your battery drain ?

Hi mate

Thanks! i traced the problem to incorrect wiring by the previous owner, the problem was a permeant 12v power supply was being sent to the headlights inside the headlight there are 2 wires which i think supply power to the headlight height adjustment motors and the power was connect all the time. As soon as this was disconnected the battery issue went away.

Matt

Datatek · Nov 21, 2010

mattstevenson2005 said:
Hi mate

Thanks! i traced the problem to incorrect wiring by the previous owner, the problem was a permeant 12v power supply was being sent to the headlights inside the headlight there are 2 wires which i think supply power to the headlight height adjustment motors and the power was connect all the time. As soon as this was disconnected the battery issue went away.

Matt

Headlight height adjustment motors on a vehicle with self leveling suspension

Are you sure ????

rewmer · Nov 21, 2010

Datatek said:
Headlight height adjustment motors on a vehicle with self leveling suspension Are you sure ????

I believe he's talking about the left right adaptive lights.

Datatek · Nov 21, 2010

rewmer said:
I believe he's talking about the left right adaptive lights.

Wot like the old Citroen DS that look round corners?

mattstevenson2005 · Nov 21, 2010

rewmer said:
I believe he's talking about the left right adaptive lights.

the lights i have don't have the left/right turn round corner feature i was referring to the the headlight 'wiggle' that they should do at startup to make them level. i have a picture of the connector and wiring inside the light, i will post it on here later to get your views on it.

Matt

Datatek · Nov 21, 2010

A couple of decent sized screws always kept the lights level in the past. sounds like complication for complications sake.

mcapinha · Nov 21, 2010

Xenon lights always include a self-levelling feature, this being one of the reasons why it isn't legal to change bulbs to Xenon, since other vehicles don't have this gizmo. I'm guessing Matt is refering to this device.

new MK4 Range Rover firmware

mattstevenson2005

Active Member

Attachments

rewmer

Well-Known Member

mattstevenson2005

Active Member

Datatek

Well-Known Member

rewmer

Well-Known Member

Datatek

Well-Known Member

mattstevenson2005

Active Member

Datatek

Well-Known Member

mcapinha

Active Member

Similar threads