Hd1966
Member
- Posts
- 77
- Location
- South wales
hi , where are you buying your new fixings from ie bolts for mud shield .
New fixings
- Thread starter Hd1966
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
eBay, go for stainless
Col
Col
Hd1966
Member
- Posts
- 77
- Location
- South wales
Ok thanks
Hd1966
Member
- Posts
- 77
- Location
- South wales
Yea I noticed a lot of crap falling out when I took the old ones off , thanks for the tip
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
If you can make your own under wing top brackets that's what I have done in the past and will be doing with the one I am restoring now 
I used a piece of plastic as the original bit broke off - think it was fibreglass.If you can make your own under wing top brackets that's what I have done in the past and will be doing with the one I am restoring now
I've just done mine. Try YRM Solutions they sell the mud shields and the fixings. The bracket to fix the top can either be riveted or glued. I used Gorilla epoxy glue. Very pleased with results. Trip from the other post on this is to use three quarters inch tap washers as spacer between the bulkhead and the mud shields to create an air space that reduces corrosion and can be cleaned out. The washer also gives a watertight seal to the bolts so no water entry into the footwells.
Hd1966
Member
- Posts
- 77
- Location
- South wales
Thanks I'll get some tap washers tomorrow
Similar threads
