New Clutch - Old Clutch is slipping

Hi Guys, today while driving down the highway i noticed that the clutch began to slip. My defender goes into real gnarly uphills every week for about 2-3 hours. its constantly out there so im not surprised that the clutch is showing symptoms of wearing out at 30,000km. Im down in Nicaragua where there is a dealership, however the dealership will charge about $2,500.00 for original clutch kit and parts with labor. I usually buy my stuff from FlatdogUK and send the stuff over to Nicaragua but with something so critical as a clutch im not sure which one to get... my defender is a puma TDCI, the mechanic said I also need a bearing... also not sure which one to get

Look for paddocks website they are a good supplier and will export, don’t get a Brit part one.

Get an AP driveline [was borg and beck] and release bearing.Paddocks supply them.

Thanks guys already placing an order with them. are the AP driveline clutch kits considered uprated or upgraded or better performance than stock?

I found the clutch but didnt find the release bearing for puma tdci

Mario Bernheim said:

I found the clutch but didnt find the release bearing for puma tdci

Click to expand...

Parts are here: http://www.island-4x4.co.uk/clutch-diesel-puma-ford-engine-c-1_2320_2470.html

https://www.turnerengineering.co.uk/lr068979-clutch-slave-cylinder-c2x24992562

Looks like the original was superseded so make sure you get all the bits to make it work!

thanks so much!