NANOCOM EVOLUTION 13??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

lrjohn

Active Member
Posts
138
Location
Suffolk
Hi all, this question has probably been asked many times so sorry if I'm repeating it but I like to absolutely confirm which NANOCOM diagnostic tool will allow me to reset suspension from air to coil after a refit and also generally be used for items such as bleeding the ABS – as well as course as reading fault codes.

It appears the one I need is NCOM 13 but can anyone confirm that in terms of having had experience in resetting suspension and also the ACC?

Any advice much appreciated

Thanks
 
The Nanocom you need is the one specific to your vehicle. The evolution unit is the same, its different unlock codes that allow it to work with different landrover models.
I have a Nanocom evolution that was bought for use with my Discovery 2 td5. I purchased a unlock code for my Freelander 2 (and the correct connection cable) and now I can use it on any Disco 2 TD5 or Freelander 2.
 
Discovery 3 and 4 have air and can be converted to springs as can range rovers.
Do you mean ACC or ACE?
So not that clear from original post.
 
Last edited:
Once you get the Nanocom:
DISCOVERY II > Td5 or MOTRONIC > SLABS > SETTINGS > change Suspension Type from Air
30736827-4FD1-40BA-AB8E-EE130FE8D444.jpeg

to COIL
00F6DAFF-66C2-4AFF-912F-65211611446A.jpeg

Hit the green right button > tap WRITE SETTINGS > Done!
 
You must log in or register to reply here.

Similar threads

300bhp/ton
P38A 4.6 fault codes
Replies
14
Views
1K
Grrrrrr
Grrrrrr
MikeFl4
P38A ABS faults and codes
Replies
17
Views
3K
MikeFl4
MikeFl4
W
P38 EAS Down on One Corner
Replies
9
Views
2K
pwood999
pwood999
N
Help - 2.4 TDCI Brakes Problem
Replies
8
Views
2K
nickc
N
J
L322 suspension + GAP tool
Replies
7
Views
3K
gstuart
gstuart
Back
Top