pptkmp
New Member
- Posts
- 11
- Location
- Switzerland
Obstinate rear wheel hub nut just won't come off. Wot's the bet way.....breaker bar......impact socket.......or just hammer the f**k out of it with a cold chisel???????
****, my nuts are tight.......!
- Thread starter pptkmp
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I think I needed to use a box spanner with a trolley jack handle levering on it, to undo one of mine. The other was no problems at all. If its really tight and you're hammering it, you'll need to replace the nut and might damage the thread too. If you use the proper tool, it will be easy even though its tight. eg if you have access to an air powered impact driver, it will be easy.
90truckcab
Well-Known Member
- Posts
- 4,739
- Location
- staffordshire
as above, locking tabs off etc ?? just get a 1/2" sharp chisel and crack the nut then undo 
five min job
five min job
- Posts
- 83,296
- Location
- Embasinga stocæ
Similar threads
Freelander 1
Now we are 2.
