More rust!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

rollin danny

Well-Known Member
Posts
1,231
Just noticed some rust along the seams of the wheel arches in the engine bay.Not gone through yet but wouldn't like to start poking a screwdriver about :eek: Whats the best way to try and slow the tin worm down ?
 
Cut it out and weld it up! Only way - or you will end up like this!

Then you will have dodgy electrics, as all the electrics/relays are behind!

Photo251.jpg
 
[JP];905592 said:
that's not bad, mine was a lot worst than that!!

as said before, the best way is to cut it off and weld a plate in
Click to expand...

Would have done it by now (stripped today to do it) only ran out of wire!:mad:

Oh well - just hope the rain holds off til the missus gets home with the new wire!
 
yep! happened to me too...

ran out of wire halfway through the day.. had to shove everything back in the garage, lock it, get in the car and go and buy more wire... bloody annoying it was!
 
you think that was bad ? this was the one ive just done :)
 

Attachments

  • ds inner.jpg
    ds inner.jpg
    188.8 KB · Views: 204
  • Image010.jpg
    Image010.jpg
    160.8 KB · Views: 217
  • Image011.jpg
    Image011.jpg
    185.3 KB · Views: 201
  • dsf primer3.jpg
    dsf primer3.jpg
    115.4 KB · Views: 197
  • dsf laq4.jpg
    dsf laq4.jpg
    223.4 KB · Views: 214
  • Image012.jpg
    Image012.jpg
    206 KB · Views: 186
if the inner wings have started then you'll be best to get ahead and change the whole thing cos other wise you will spend all your time patching things up - andf then you'll have to do the whole thing.
I got replacement inner wings off a guy on ebay - yrm metal solutions - they were brilliant, good metal, easy to fit and look the part now they are done.
 
Thanks for the advice.How much would a small mig welder cost ? .The sills need doing so might ask Father Christmas for one.
 
I got mine off ebay, a SIP100 and was about 40 or something, cant remember... second hand of course.

its small, but did a good job, you cant only weld for about 45min and then you have to stop as it overheats..but buying that and learning how to weld saved me a shed load of money
 
you dont really want a little mig - get one that does to ~150Amp, cos discos are made of thicker steel ( 1mm) than some of the jap rubbish, so eventualy you'll end up wanting a better one anyway.
 
well.. I've used a SIP100 (little mig) and did the job with no worries...

from this:
7232_267819165612_727855612_8852537_1675877_n.jpg


to this:
7728_294882440612_727855612_9261515_6919004_n.jpg


and many other bits, including front inner arches, rear arches, etc...
 
You could buy second hand or hire one. There are plenty of places that do new one at a good price though! A sealy mighty mig 100amp gasless is 130 quid!
 
You must log in or register to reply here.

Similar threads

S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
Rank Amatuer
Freelander 2 (LR2) Is it worth it?
Replies
11
Views
982
GrumpyGel
GrumpyGel
MAF Diver
Disco 2 Steering wheel noise when turning left and stationary-ish — changing PAS and hose did not fix
Replies
3
Views
729
MAF Diver
MAF Diver
A
D2 autobox shudder issue (maybe)
Replies
8
Views
1K
Stanleysteamer
Stanleysteamer
J
Whining/hissing nosie on accelerating
Replies
1
Views
878
Toonraider
T
Back
Top