Freelander 1 Manifold Inserts

I need one of the manifold inserts for the rocker cover on rear bank on the V6. As you look at the engine it's the one on the left and connects to its twin brother on the front bank also on the left. Now there are two inserts on the rocker cover the one I need is the larger of the two. Rimmer's list two, this one:

LZN100220, without the L in the part number so one for the 75?



and this one:

LZN100390L with the L so a Landy part.



Are they both the same? They look it, and is it the one I need?

Thanks in anticipation.

Ask hippo he knows all there is to know about the v6

That looks exactly the same part, with a different coloured o-ring.

Is there much of a price difference?

Thanks for the replies chaps. Bit more digging and it's not the inserts I want. Apparently not available on their own. I'll message the Guru though just in case.

Thanks.

Is it item 3 in this pic?

http://lrcat.com/#37/4/48167 (click old catalogue if asked)

Hippo said:

Is it item 3 in this pic?

http://lrcat.com/#37/4/48167 (click old catalogue if asked)

Click to expand...

Thanks for the link but I don't think it is the one. In the photo, it's the left hand one I need, think the part listed is the one on the left.

So yer wants the grey one?

told you ask Lord Hippo

Grey one on the left is red on ma hippo...
left is bigger than the one on the right

Rover peeps struggle with this part anorl. It seems there isn't a separate part sold. this has been covered before so unless there's anything new on the market, other have suggested before to change to a metal insert in the fred below:

https://www.landyzone.co.uk/land-rover/pcv-valve-fix.236334/

LZN100390L

http://www.brit-car.co.uk/product.php?xProd=99599

LZN100220L

http://www.brit-car.co.uk/product.php/125033/0/press_in_insert_inlet_manifold

Got one on order.

Thanks again for the help.

When yer get the parts can yer let us know what yer ordered and if it works ok. Ta.

Will do.

Part arrived just now, 220L. It's not the part I'm looking for.

Plan B. Errrmmm!?

The link above I posted talks about getting a metal version and fitting that instead, but they have a thread. It would mean choosing the right size for the hole.

What's wrong with the original? Could it be sealed with something if it can't be replaced? It looks like rover kv6 owners suffer with this problem too. I wonder if @Nodge68 has come across this problem anorl.

Hippo said:

The link above I posted talks about getting a metal version and fitting that instead, but they have a thread. It would mean choosing the right size for the hole.

What's wrong with the original? Could it be sealed with something if it can't be replaced? It looks like rover kv6 owners suffer with this problem too. I wonder if @Nodge68 has come across this problem anorl.

Click to expand...

I'm in the process of replacing a rattly manifold and whilst I was at it clean out the breathers and renew the meshes. Managed to remove all of the other hoses and inserts quite easily, this one wouldn't budge until the grey clip snapped. My plan B revolves around using some heat shrink to hold the pipe in place, it's not as if it's load bearing or anything similar, just needs to stay put and be sealed.

I find it truly amazing that we can't get a replacement.

Update.

Read through the thread -https://www.landyzone.co.uk/land-rover/pcv-valve-fix.236334/ which Hippo posted - thank you, and ordered this:

http://www.rimmerbros.co.uk/Item--i-LYC100510

Came today and it is the part. It's listed as something to do with the dipstick tube on Rovers but connectors for Land Rovers????.

Can now put it back together.

Thank you for the help and guidance, hopefully this will help others.

Good to know it's sorted and the part.