Disco 2 LT230 rear seal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

tilly2

Well-Known Member
Posts
1,193
Location
Stafford
Ordered a rear output seal for my leaking LT230 transfer box, on the Disco 2, TD5.

Arrived this morning but Im not sure I have the correct part...

Ordered a STC3433 off R and C 4x4 off thE bay....

This is what was listed in the kit...
s-l1600.jpg


and this is what arrived...

s-l500.jpg


Which one is correct, as both state they are LT230 rear output seal kits...
 
You need a new felt washer. Don’t know why some kits come without. Soak in gearbox oil first. The one in pic with extra bolts is new bolts for flange and a circlip for retaining bearing.
 
And I wouldn’t even fit that seal! Get corteco one or similar for sake of a fiver and ensure seal land is clean and not marked
 
Im not replacing the bearing, so I take it I dont need that... although, watching some of the Youtube videos, it doesnt seem a hard job. I have a slide hammer... Anyone have the part number for the bearing.
 
Edit - I have a different part no. to above...
 

Attachments

  • FCD451FF-2042-491D-B9EA-9F7228AFFDC1.jpeg
    FCD451FF-2042-491D-B9EA-9F7228AFFDC1.jpeg
    186.5 KB · Views: 122
Cheers James.... just ordered a Cortico from Ebay, for just under a fiver... and ordered a FAG bearing for £8.70, plus a pair of felt washers...
 
Last edited:
You must log in or register to reply here.

Similar threads

usna87
LT230 grinding noise?
Replies
7
Views
516
usna87
usna87
S
Lt230 1.310 ratio
Replies
3
Views
348
Sam Warder
S
miktdish
Elusive screw on LT230
Replies
12
Views
880
miktdish
miktdish
Seaswood
Transfer case rear seal transmission brake
Replies
5
Views
893
Seaswood
Seaswood
D1Nut
Lt230 drain plug broken in-situ
Replies
5
Views
744
Stanleysteamer
Stanleysteamer
Back
Top