hi guys really didnt want my first post on here too be begging for advice, but am a bit stuck as what too do next. i have a 1995 4.0 that had a eas hard falt. so i got cable and software unlocked eas and found that it had leaking air bag. all on the way out so replaced them all front and rear.
when all changed it moved up and down fine no problems. took it for a spin and within 2 miles it went too a soft fault all lights on but no 35max showing.
plugged into laptop too read faults. showed fr signal incorrect so i took plug apart on hight sensor cleaned it re conected it. restarted engine ran test again then showed fl signal incorect did the same too that one. now shows no faults. but when ever i unplug the comp the slow 35mph max pops up on dash and beeps. and sticks in standard hight. as soon as it is plugged in again falt clears by its self. and no falt code shown. then when i stop test it beeps and shows 35 max again and wont move.
not sure what to try nxt new hight sensors or ???????????
have searched old posts for advice but cannot find anything that relates too this. thanks in advance. guess this is all part of the fun of owning a p38.
when all changed it moved up and down fine no problems. took it for a spin and within 2 miles it went too a soft fault all lights on but no 35max showing.
plugged into laptop too read faults. showed fr signal incorrect so i took plug apart on hight sensor cleaned it re conected it. restarted engine ran test again then showed fl signal incorect did the same too that one. now shows no faults. but when ever i unplug the comp the slow 35mph max pops up on dash and beeps. and sticks in standard hight. as soon as it is plugged in again falt clears by its self. and no falt code shown. then when i stop test it beeps and shows 35 max again and wont move.
not sure what to try nxt new hight sensors or ???????????
have searched old posts for advice but cannot find anything that relates too this. thanks in advance. guess this is all part of the fun of owning a p38.
