Location of chassis VIN stamp - TDi 300

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

thebiglad

Well-Known Member
Posts
7,387
Location
Central France
Hi all I've searched the forum but cannot find the location of the VIN chassis stamp for my '98 TDi 300 Disco.

I thought it was on the RHS chassis rail just in front of the front axle but it doesn't appear to be there.

I know on the DII's it's at the rear RHS on the chassis so I looked there as well but no luck.

Anyone know where it should be for a TDi 300 Disco?

Cheers
Dave
 
Rear right hand outrigger on my lhd 95 disco 300tdi if that helps, took some finding and scraping to read. Hth


Thanks for that DP, I'll go and have another look. So just to be clear, we are talking about the RHS rear and the outrigger which goes from the chassis to a body mount? Is your number on the front side or the rear side of the outrigger?

Dave
 
Well I've just been to have a look. Just the rear wheel off for better access and scraped away like a good'un.

If it ever was there, it's not there now.

I'm only bothered about this as it was drawn to my attention by the Contrôle Technique man. It's important over here that the chassis is stamped, so I'll have to buy myself a stamp kit I suppose.
 
I get the feeling there was a somewhat cavalier attitude towards chassis stamping at Land rover during the building of disco 1s, or maybe full stop.
 
Just wanted to update - nothing to report because it's so feckin' cold outside.

- 10° C and dropping.

Will report back when the weather let's me!

Dave
 
Back
Top