1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Lightweight front hubs

Discussion in '101's and Military' started by TheMegaMan, Oct 21, 2019.

< Previous Thread | Next Thread >
  1. TheMegaMan

    TheMegaMan Member

    Joined:
    Oct 15, 2019
    Posts:
    44
    Likes Received:
    4
    Location:
    Cambridge
    Hi,

    I have a 1981 88 Series 3 (and yes, I have asked over on the Series forum, but it was suggested I ask here, too!), that has what I believe are front hubs from a Lightweight.

    They look like this:

    20191019_164053.jpg 20191019_164058.jpg

    The drive shaft has 24 splines at the hub end (although the diff end has the regular 10 splines for an older vehicle).

    I'm rebuilding the Landy, and and refreshing the axles as part of that. So I'm looking for new seals, etc. I believe I've found most of the appropriate parts, but I can't find the O-ring or rubber/felt seal (although it's hard to tell as the old one has broken up) that are used in the hubs/drive member.

    Can anyone suggest a part number and/or supplier for the lightweight-specific seals?

    Thanks,
    Adam.
     
< Previous Thread | Next Thread >