L322 Temperature Display

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

garioch43

Active Member
Posts
352
Location
Aberdeen, Scotland
Just got my 2002 4.4HSE back from a service and the external temperature display is showing farenheit instead of centigrade.

Any idea how to change it back to centigrade.:confused:

No satnav, so can't control it from there.
 
I had the same problem. I am sure it changed after diconnecting and reconnecting battery. My fuel consumption also used to show:- KM/litre but is know MPG.
 
Your Owners Manual should tell how to change the A/C display from F*to C*.

On a P38 you push and hold the 2 outer air flow direction buttons on the HEVAC control panel for about 4 seconds, if I remember correctly...
 
Thanks for the feedback guys.

I can change from MPH/MPG to KPH/KPG using the programming functions of the trip computer.

It's not the Aircon display, it's the external temperature display, which is part of the instrument cluster.
 
Is it amongst the setting on the Sat Nav display. If I remember rightly, top left button.
 
Stop looking!

With the ignition key in position 1, press and hold the trip odometer reset button. While holding the button in, turn the key to position 0. This changes the temp display on the A/C and the exterior temp display.

;)
 
Back
Top