L322 front wing side vents - 2 or 3?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

mrblonde

New Member
Posts
276
some L322's ive seen have 2 'fins' on the side vents, some have 3, do they all fit one another, or were some made with 2 fins, and some with 3?

Thanks in advance
 
Hi

yes is the answer 2002 -2005 models had 2 fins and are interchangable with the later 3 fin type did it myself on my 2002 vogue takes about an hour to do the job just be carefull with the lower wing plastic bits when pulling out the old fins.

go for it

Tony:)
 
It was a trim issue thing so that ones butler could distinguish his masters Vogue from the builder riff-raffs HSE in the country club car park.

I think the vogue had 3 and the plebs had 2, the supercharged had mesh
 
jerseybean said:
Hi

yes is the answer 2002 -2005 models had 2 fins and are interchangable with the later 3 fin type did it myself on my 2002 vogue takes about an hour to do the job just be carefull with the lower wing plastic bits when pulling out the old fins.

go for it

Tony:)
Click to expand...

cheers Tony, i got the 3 fins but in black (on a black vogue), want to try the grey 3 fin ones one

thanks again
 
SpudH said:
It was a trim issue thing so that ones butler could distinguish his masters Vogue from the builder riff-raffs HSE in the country club car park.

I think the vogue had 3 and the plebs had 2, the supercharged had mesh
Click to expand...

Cheers spud, im not quite 'master' yet, but i do hope one day... See you at the country club squire ;)
 
will do Dave, and id like to see some pictures of anything you owned by Ford from the 80's or 90's that was rwd and turbocharged ;)
 
SpudH said:
It was a trim issue thing so that ones butler could distinguish his masters Vogue from the builder riff-raffs HSE in the country club car park.

I think the vogue had 3 and the plebs had 2, the supercharged had mesh
Click to expand...
wot he sed
 
mrblonde said:
Cheers people

voguely, is the 2 fin/3 fin one complete assembly, so they'd be interchangeable?
Click to expand...

All the different styles are interchangeable from 2002- 2 fins upto the latest 2010 mesh design. You can just swap them for whatever style you want, what you have to remember is the 2002 L322 range rover shape is the exact same car as the latest 2010 shape so whatever styling is on the other model years will fit any other model year.

Matt
 
bigdel im impressed! if i say i hate you its meant in the nicest possible way :D thought you lot on here would be a load of plus four/barbour wearing toffs, glad theres some ex-ASBO'ers here too haha :D I owned performance fords old project saph for a while til some northerer bought it and wrote it off :(

Matt, sorry for being up the subject, all the best for the weekend.. had yours had the recall/modification done to prevent battery drain?
 
mrblonde said:
bigdel im impressed! if i say i hate you its meant in the nicest possible way :D thought you lot on here would be a load of plus four/barbour wearing toffs, glad theres some ex-ASBO'ers here too haha :D I owned performance fords old project saph for a while til some northerer bought it and wrote it off :(

Matt, sorry for being up the subject, all the best for the weekend.. had yours had the recall/modification done to prevent battery drain?
Click to expand...

Which mod are you talking about is it the HVAC resistor?

Matt
 
You must log in or register to reply here.

Similar threads

M
L322 passenger side front indicator cluster
Replies
3
Views
438
kds
K
Padda.116
L322 stuck in park and handbrake stuck! Coolant Tanks also?
Replies
3
Views
377
Blob
Blob
T
P38A Dash Lifting Demist Vents
Replies
1
Views
487
pwood999
pwood999
RobV8Defender
Range Rover Classic 1990 Air Vents
Replies
7
Views
1K
norseman
norseman
Scumball500
1987 defender wing
Replies
6
Views
535
Knappster
Knappster
Back
Top