P38A Key fob

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Main problem is usually contact to battery positive coming loose. Or positive on upper battery touching positive clip that goes up from bottom of battery holder hence only giving 3 volts. Bit of insulation tape sorts that out. Pretty simple job to remove case and fit a new one and repair connection whilst board is out. But whatever you do DON'T cut case to separate it anywhere near LED indicator.
 
I cleaned all the contacts, I think the problem was the connection to the battery cover and the contact with the board, they connect when you twist it shut, anyway I sent it off to be repaired with a new case £40 is dam sight cheaper then ordering a new one
 
Back
Top