Jubilee clips

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Ok 8-16mm SHOULD do it, the ad say's it oil and fuel "resistant" so i dont know if it will be any good for long term but it may just be the way he's worded it best contact him and ask if it's propper fuel hose
 
oldskool said:
You need to know the od :doh: and this can vary with different makes/types of hose, can't believe im actualy entertaining this with a responce:rolleyes:
Click to expand...



oldskool said:
Ok 8-16mm SHOULD do it, the ad say's it oil and fuel "resistant" so i dont know if it will be any good for long term but it may just be the way he's worded it best contact him and ask if it's propper fuel hose
Click to expand...

Thanks. I asked the seller and he replied quickly saying that 13-20mm are the perfect size for it. It's proper high-pressure fuel hose according to him.
 
Langers said:
Thanks. I asked the seller and he replied quickly saying that 13-20mm are the perfect size for it. It's proper high-pressure fuel hose according to him.
Click to expand...
Depends on how thick the hose wall is, that size clip would go out of shape on the hose i use (they don't stay round if you have to tighten them down to far.
The high preasure side isn't so much of a problem as long as it doesn't get attacted by the fuel. Coolant hose is high preasure but is only RESISTANT to fuel/oil.
 
You must log in or register to reply here.

Similar threads

D
Air in Fuel and hard starting .
Replies
3
Views
851
Ratae
R
border
Servo
Replies
9
Views
611
border
border
T
Fuel pipe question
Replies
4
Views
703
adrian hogg
adrian hogg
Pluribus
Freelander 1 Inlet manifold replacement - Updated with steps and pics :)
Replies
8
Views
2K
Alibro
Alibro
W
Source for rubber tubing for expansion bottle?
Replies
9
Views
984
honolulujoe
H
Back
Top