It doesn't tally up.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
That is not a 2001 engine. Not with an alloy manifold it isn't. Has a MAF though so maybe had an engine change.
 
Last edited:
I ask him the question back in october and the reply I got was I rebuilt the original engine seems a very funny car with a non original engine.

If it is a 2001 with a pre egr engine I would expect it not to work unless he changed all the wiring loom etc

Things that spring to mind are:
Egr valve
Maf
Third temp sender in head

Whilst looking at the pics it seems it could be a 2001 and he has fitted a alloy inlet as he still has the maf sensor in the pipe and it looks connected
 
Last edited:
matt1987 said:
I ask him the question back in october and the reply I got was I rebuilt the original engine seems a very funny car with a non original engine.

If it is a 2001 with a pre egr engine I would expect it not to work unless he changed all the wiring loom etc

Things that spring to mind are:
Egr valve
Maf
Third temp sender in head

Whilst looking at the pics it seems it could be a 2001 and he has fitted a alloy inlet as he still has the maf sensor in the pipe and it looks connected
Click to expand...

Engine would not need any looms to work properly. Only thing missing is EGR valve and the third sensor which is an easy fit. Engine would run normally less EGR.
 
Last edited:
You must log in or register to reply here.

Similar threads

Walshie1987
L322 Doesn't sound right?
Replies
6
Views
756
Walshie1987
Walshie1987
Wazzajnr
L322 Westminster or not?
Replies
12
Views
1K
Wazzajnr
Wazzajnr
newb
L322 DIY Full Service
Replies
9
Views
1K
Datatek
Datatek
Rockingit
L322 How big a job is it to replace the upper rear wishbone?
Replies
17
Views
1K
Rockingit
Rockingit
R
Sat nav problem
Replies
6
Views
652
Graculus
Graculus
Back
Top