is it possible and how
- Thread starter jetlad
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomania
Well-Known Member
- Posts
- 6,947
Yes its possible, try and get the kits with the template, and TAKE YOUR TIME when cutting the hole!
I have seen them from a few suppliers advertised in magazines and things, but can't remember who.
I have seen them from a few suppliers advertised in magazines and things, but can't remember who.
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
i had an old roof with the alpine wondows in, removed the glass and cut out the 'hole' and surrounding ally. i bought a newer smooth roof and used the old roof 'holes' as a template, measured the distence from the back of the roof and marked the position of the hole to be cut.
i cut it smaller than it should have been then filed it to the correct size then fitted the glass.
easy to do if you take the time to get it positioned right and take your time cutting out.
i used an air nibbler to get it near the right size then a file to get it perfect.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Much easier to just buy one off ebay with the windows already in place. and sell yours on to recoup some of the dosh.
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
if you go down the 'new roof' approach i may buy your oldun off u
