intercooler hose rubbing

joe27979 · Feb 4, 2011

hey all
the hose out of my intercooler on my 2003 TD4 that goes into top manifold then onto egr is chafing.
the hose (on front left of engine) is chaffing against the manifold screw.
I've got a new hose but wondered best solution to stop it rubbing?

longdog · Feb 4, 2011

Use a section of the old hose as a sleeve.

davie garden · Mar 18, 2011

Use cable ties and pull it free of the area that's causing the damage, i.e. tie it onto the car body somewhere.

Optimus Prime · Mar 18, 2011

exactly as longdog said, split the old one down it's length, wrap round and secure with cable ties, stainless steel are best.

here's a link to the photo of mine:

Freelander td4 Intercooler Hose - Land Rover Photos

forget tying it out of the way to a body part, there is nothing handy that would work.

joe27979 · Mar 19, 2011

thanks prime-did the same as you and all sorted

intercooler hose rubbing

joe27979

Well-Known Member

longdog

Active Member

davie garden

New Member

Optimus Prime

Well-Known Member

joe27979

Well-Known Member

Similar threads