indicator flasher unit

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Posts
71
Location
Manchester
Hello everyone, Asking for info again, just trying to rewire my series 3 swb diesel with a autosparks main harness but cannot seeem to find what wires go to indicator flasher unit(no hazards fitted) on the wiring diagram it has only two wires showing but my flasher unit is an old Durite GE 146 but it has four push on terminal spades on it which are.
.K1 ,K2, S, and+ (not sure if unit is working as wiring was burt out when I bought landy)Thanks Steve
 
Hello everyone, Asking for info again, just trying to rewire my series 3 swb diesel with a autosparks main harness but cannot seeem to find what wires go to indicator flasher unit(no hazards fitted) on the wiring diagram it has only two wires showing but my flasher unit is an old Durite GE 146 but it has four push on terminal spades on it which are.
.K1 ,K2, S, and+ (not sure if unit is working as wiring was burt out when I bought landy)Thanks Steve

Hi saw your previous post on this, not sure you have the right relay here as most are only 2 terminal. 4 and 5 terminal units tend to be on vehicles with hazard warning lights. Try Durite on 01255 555200 for some technical help they are in Essex
 
Back
Top