Replacing the ignition steering lock assembly on a bulkhead i bought, question is, which wires connect where as the wiring diagram labels the pins on the back of the ignition switch a bit different to whats there for real. (Strange - i thought so)
I did rarve the old one out and consquently pulled all the wires off before markin what went where...... ooooppps:doh:
I have four wires:
Brown
White
White/Orange
White/Red
This is how the diagram shows to connect it:
Brown - IN1 & IN2
White - 1
White/Orange - POS2 Aux
White/Red - POS4 Crank
But the pins on the switch are labelled
1
2 (2 no. pins)
3
5
Hope this makes sense and someone can help!!!
Thank you
Joe
I did rarve the old one out and consquently pulled all the wires off before markin what went where...... ooooppps:doh:
I have four wires:
Brown
White
White/Orange
White/Red
This is how the diagram shows to connect it:
Brown - IN1 & IN2
White - 1
White/Orange - POS2 Aux
White/Red - POS4 Crank
But the pins on the switch are labelled
1
2 (2 no. pins)
3
5
Hope this makes sense and someone can help!!!
Thank you
Joe
