I think I'm lost..... Is this the hairdressers?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Sirus

Your all Banned except me
Posts
22,196
Location
The Country of Black
Me sisters gaylander has starting issues. Having not looked at it she recons then solenoids playing up as it starts if her ****s it witha big stick. Now as its one of them delicate 1.8 uns how easy is it to get to the starter to remove it and also can you get the parts to fix the solenoid or is it a new starter jobbie. I know you can get the bits for 2.5 v6 starters but I cant find any in this country.

Is that funny smell perming solution?
 
Me sisters gaylander has starting issues. Having not looked at it she recons then solenoids playing up as it starts if her ****s hit witha big stick. Now as its one of them delicate 1.8 uns how easy is it to get to the starter to remove it and also can you get the parts to fix the solenoid or is it a new starter jobbie. I know you can get the bits for 2.5 v6 starters but I cant find any in this country.

Is that funny smell perming solution?

How would that help start it, and dunt it hurt her?
 
New starter..Bearmach about £150 (land rover £250).

1) Disconnect battery, and disconnect +ve and IGN switch from starter
2)Remove air box (2 bolts in the side of the battery tray into air box) and disconnect from inlet manifold and air cleaner
2) Remove steady bar from engine mount, and top bolt of starter motor (be aware there are nuts on the other side, the thread is not cast into the bellhousing).
3) Support starter motor and undo lower bolt, which also has a nut on the other side.
4) Slide starter motor out
5) Fitting is opposite to removal
 
New starter..Bearmach about £150 (land rover £250).

1) Disconnect battery, and disconnect +ve and IGN switch from starter
2)Remove air box (2 bolts in the side of the battery tray into air box) and disconnect from inlet manifold and air cleaner
2) Remove steady bar from engine mount, and top bolt of starter motor (be aware there are nuts on the other side, the thread is not cast into the bellhousing).
3) Support starter motor and undo lower bolt, which also has a nut on the other side.
4) Slide starter motor out
5) Fitting is opposite to removal


I have always wondered how to change a hair-dryer motor, thanks storm.
I knew the freelander section would be the place to find this info:lol:
 
I'm in touch with my inner hairdresser.

Oh, while we're here, my sister has one testicle larger than the other and it aches after she gets a blowjob. Is this normal? (People from Devon need not reply).
 
Back
Top