Disco 1 How strong is a Disco 1 Roof

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ceffyn

Active Member
Posts
418
Location
Aberdare - South Wales
as the title says guys how strong is the roof of a disco. as many of you know i've had some transfer issues and now have managed to get a replacement. but here's where the roof things comes into it. everyone has said use a hoist to take out the old and put in the new (im removing gearbox and transfer and replacing both)

but the only engine hoist i can get my hands on is a frame and chain lift that wont come down low enough to go through the car. so my thought was can i put a strap over the roof in through the windows and put a chain lift onto that and do it.

before everyone shouts at me for how many ways this is wrong take into account i have done NOTHING yet i am only asking to try and come up with some options.

as always thanks for the replies in advance.
 
Sorry just realised this is the disco thread not the fender one...

I guess your leaving the engine in, I always find it easier with it out when I don't have a lift.
With bonnet off you could use your chain fill on the bell housing and a jack at the back.

Fail g that can you rent an engine crane or rig some scaffold through the car and drop it on a chain fall
 
new update managed to get my hands on a hoist WOOOP WOOOOOOP lol will be attempting the job tomorrow i'll try get a load of pics and post after it on how it went but i cant promise i'll stick to the photos as im doing the job will depend on the time taken stress levels hit haha
 
Back
Top