How do I remove this?
- Thread starter Dhammadad
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 6,225
- Location
- North Manchester
A rope, a lamp post, and reverse 
Disclaimer:- I take no responsibilty for damage caused by anyone following my advice.
Disclaimer:- I take no responsibilty for damage caused by anyone following my advice.
- Posts
- 68,356
- Location
- The Wooly Witch
Check it's attachments, usually from underneath to the chassis ...maybe ...
Struggling to find 'em...!
- Posts
- 68,356
- Location
- The Wooly Witch
Are there some covers that they hide under ?
Not that I can see....a couple of 'studs' on the top near the bumper but they're for Fog Lights I think....
- Posts
- 68,356
- Location
- The Wooly Witch
- Posts
- 68,356
- Location
- The Wooly Witch
- Posts
- 6,225
- Location
- North Manchester
Here's a link to the fitting instructions
http://me1000.co.uk/Other stuff/Protection bar A frame STC50021 Fitting Instruction.pdf
http://me1000.co.uk/Other stuff/Protection bar A frame STC50021 Fitting Instruction.pdf
You're a star, thanks!!
Not sure why I would leave it on....nice little job for the morning (uh ho......gone n said it now!!!)
- Posts
- 6,225
- Location
- North Manchester
IMO it's a non electrical parking sensor, as is the tow bar for reversing, at least mine was
- Posts
- 68,356
- Location
- The Wooly Witch
- Posts
- 6,225
- Location
- North Manchester
Lot's of other installation manuals as well courtesy of another 4x4 forum http://me1000.co.uk/
- Posts
- 68,356
- Location
- The Wooly Witch
EXACTLY one of the reasons it's going!!!
Many grazes on the back of your hand?
i cannot remember if I left mine on when I sold it or not, certainly dont miss it.
That manual isn't particularly clear....is it bolted to the bumper somehow? I took the Reg plate off but couldn't see anything that has it fixed(?)
It was a few years ago now, I might have removed bumper, but I doubt it was that involved?
Any on ebay you can look at the pics to work out where the bolts are?
Similar threads
Disco 3 (LR3)
Mirror adjust switch removal
