Help!!!

buckland · Dec 13, 2010

Hi guys and Girls,

Just wondered if any1 can help or point me in the right direction.

I was out driving at the weekend and my 1992 j plate 3.9 v8 auto range rover decided to not go into reverse, It still have drive but thats it. Is there a quick fix for this or will it be time to replace the hole box???

Any help would be welcome.

Thanks
Rob.

Datatek · Dec 13, 2010

If the lever is still moving correctly, then it's the reverse clutch slipping. Worth checking the oil condition and level.

joe1972 · Dec 13, 2010

Yep. start car, engage neutral, lift bonnet, and check gearbox fluid level. Don't do it whilst engine off as it needs to be cold and running for the correct level to be indicated on gearbox dipstick (left hand side, near bulkhead, next to brake fluid reservoir)

fett · Dec 13, 2010

try putting it into D and bump it forwards a few inches and then see if it will go into reverse.

if not it might get pricey!

Help!!!

buckland

New Member

Datatek

Well-Known Member

joe1972

Well-Known Member

fett

Well-Known Member

Similar threads