Hi folks. Need some help with trying to get my 1975 Series III going again. It was running a few months ago after I fitted some new plugs/battery, serviced the fuel pump and fitted a new ignition coil. Unfortunately it was left alone again for a while and then wouldn’t start again. Checked everything but I may have wire up the ignition coil/battery wrongly and the top of the distributor started smoking. Opened that up and bits appeared to be burnt out and very old, so I bought a new one and fitted that. Now I think the timing is out and it wont start. I have tried to start it and twist the distributor but still no luck. Cleaned all the plugs and they all appear to spark after testing them. Not sure my next move. Have tried YouTube videos and my manual but seem to be stuck. I’m hoping that all your mechanical experiences can point me in the right direction. Fingers crossed emoji 
PS I can post picks if that will help.
PS I can post picks if that will help.
