Get-me-back-in-the-mud
New Member
- Posts
- 9
- Location
- Central Scotland
Hi folks, bought a td5 disco just over a week ago, radiator burst, so I've just replaced it. Bled it as the Rave manual said, had heaters, radiators hoses all hot, radiators itself hot. Steady nice flow with no bubbles out the bleed screw, It went up to temp after sitting at quarter on gauge for ages.
So took it a drive. Soon as drive it drops right back down to quarter on gauge again, then eventually I assume the thermostat opens again, and away back up to half way it goes.
So rebled, tryed again, exactly the same, hot radiator, hot hoses, hot heaters but temp gauge going from quarter to middle, back to quarter then up to half again over and over.
Sitting in it now at idle, was up at temp, now back down at quarter!
Any suggestions?
Thanks.
So took it a drive. Soon as drive it drops right back down to quarter on gauge again, then eventually I assume the thermostat opens again, and away back up to half way it goes.
So rebled, tryed again, exactly the same, hot radiator, hot hoses, hot heaters but temp gauge going from quarter to middle, back to quarter then up to half again over and over.
Sitting in it now at idle, was up at temp, now back down at quarter!
Any suggestions?
Thanks.
