D90mitch
Well-Known Member
- Posts
- 2,419
yes, again the head gasket! i know the 200tdi's are tough F*ckers but what are the chances of the head being warped or damaged from the head gasket going?
Head gasket
- Thread starter D90mitch
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 64,665
- Location
- Gloucestercotshirewolds
High.......get it tested and skimmed if needed
D90mitch
Well-Known Member
- Posts
- 2,419
brilliant -.- . Hopefully I'll get lucky, but from past experience i dont often o.o
Conn3h
Member
- Posts
- 88
- Location
- Derbyshire
Mine went big style a few weeks ago to the point where it was pressurising the engine and oil was spraying out the dipstick and cam breather and filling the cab with smoke, my mechanic said they often go unless you put the uprated gasket on but very rarely damage the head, mine was fine, new gasket and a clean up and pulls like f**k again
D90mitch
Well-Known Member
- Posts
- 2,419
cool, hope i am as lucky as you
Conn3h
Member
- Posts
- 88
- Location
- Derbyshire
Have faith in your Landy 
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
measure the face with straight edge and feeler guages ,if very bent 10 thou or morec replace it if under you may get away with skimming it ,if straight fit back on unless fire ring marks were gasket sits
D90mitch
Well-Known Member
- Posts
- 2,419
of course ^^Have faith in your Landy
