Has Anyone Installed a Catch Can?

Has anyone installed a catch can on their 2.4 Puma engine? Does anyone know of a good quality kit?

Last week, I had to patch a blown turbo boost hose until the replacement arrived. When the replacement arrived today, I took out the patched hose and found a surprising amount of oil in the hose. Only driven a couple of times while waiting for the new hoses. Just installed the new hoses today (Allisport Blue Silicone Hoses) and would rather not have all that oil going through the new hoses, inter-cooler, intake manifold, etc.

I am finding lots of kits on the internet - but none that are designed to fit the 2.4 Puma engine.

Thank you in advance for any information.

You can probably make your own catch can along with tubing for cheap. Check YouTube on how to efficiently make one.
I googled and found some catch cans for the Puma going for £350!!!!
Take a read here for other options....
https://www.defender2.net/forum/topic18572.html
https://www.defender2.net/forum/topic26798.html?highlight=provent

For my Disco 2 V8, I have all the bits I need to install my modded oil catch can. The main problem for me is finding a good location to mount it away from the exhaust manifold heat.

A slight thread resurrection but the Provent 200 available on eBay for less than £20 is a doddle to fit and looks factory finish !
Genuine Provent is around £90 so not sure if eBay ones are a knock off