Half shaft won't come out!!!!

Callum-d90 · Dec 7, 2011

Once again having problems with my landy, after changing one side wheel bearings on the rear I started on the other... Only I can't get the drivers side ( (short) half shaft out! Any suggestions?

Pikey · Dec 7, 2011

what's the prob Is it not Moving at all?? or it is coming so far and jamming??

Callum-d90 · Dec 7, 2011

redhand said:
what's the prob Is it not Moving at all?? or it is coming so far and jamming??

Goes about 4" then jamms when it's free it can be spun freely and isn't bent :s

Pikey · Dec 7, 2011

Callum-d90 said:
Goes about 4" then jamms when it's free it can be spun freely and isn't bent :s

Big pry bar.. Sounds like it's damaged and snagging Ya other option is to undo the nuts where the HUb is bolted to the axle case and take the whole hub assembly off in one piece At least that way ya can whack the other end of the half shaft out of the hub.

Callum-d90 · Dec 7, 2011

redhand said:
Big pry bar.. Sounds like it's damaged and snagging Ya other option is to undo the nuts where the HUb is bolted to the axle case and take the whole hub assembly off in one piece At least that way ya can whack the other end of the half shaft out of the hub.

Cheers for that

will have a bash.

[JP] · Dec 8, 2011

this is on the rear right?

Callum-d90 · Dec 8, 2011

[JP];1724984 said:
this is on the rear right?

Yeah got it out now, sub axle was f**ked to say the least

Half shaft won't come out!!!!

Callum-d90

New Member

Pikey

Dummy Ejection Facilitator..

Callum-d90

New Member

Pikey

Dummy Ejection Facilitator..

Callum-d90

New Member

[JP]

New Member

Callum-d90

New Member

Similar threads