1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Half shaft 10/24 950mm

Discussion in 'Defender 90 / 110 / 130' started by Tonks4x4, Sep 14, 2013.

< Previous Thread | Next Thread >
  1. Tonks4x4

    Tonks4x4 Active Member

    Joined:
    Dec 6, 2008
    Posts:
    234
    Likes Received:
    0
    Location:
    Huthwaite, Nottinghamshire
    Hello guys, I have searched extensively on the forum and on the net, but been unsuccessful in finding the information.

    I have a half shaft from an unknown Land Rover which is for a rear it measures 950mm long has 10 splines one end and 24 splines the other. It also has the machined section to run on the inner seal in the stub axle. Can anyone enlighten me with its part number?

    Here is a list of the LH shafts that I have found

    Part No, Length, splines diff end, Splines hub end
    FRC7681 - 978 - 10 - 24
    FTC3731 - 978 - 10 - 24
    FRC8095- ??? - 24 - 24 - No Oil Seal
    FRC2455- 978 - 24 - 24 - No Oil Seal
    FTC1725 - 990 - 24 - 24 - Has Oil Seal
    TOB500030 - 953 - 24 - 24 - Has Oil Seal FTC4748Old Number for TOB500030
     
  2. jamesmartin

    jamesmartin Well-Known Member

    Joined:
    Dec 8, 2010
    Posts:
    80,338
    Likes Received:
    11,082
    Location:
    louth lincs
    try ftc871 some rrc 92 ish had 10 spline diffs and seals in stub
     
< Previous Thread | Next Thread >