Haldex service

Following request for cam belt change posted just, thinking about the Haldex unit also.
Garage purchased from told me that Haldex pump had been changed, but looking at standard of work done (or not as the case may be) i really doubt service had been carried out.
How much should I expect to pay for Haldex service (oil and filter clean / replace) or is it something that can be done on the drive using ramps (getting older and lazier tho! )
Any help appreciated.
Snowy.

Hi Richard.
What year is the FL2 does it have the Haldex 3 gen or Heldex 4gen fitted either way the service of oil & filter can be done at home of ramps, or you could take it to these guys below.
http://www.bellengineering.co.uk/freelander-2-products/

If taking the job on your self then you can get oil & filter from here. remembering to state which Haldex gen you have.
https://www.ebay.co.uk/itm/Volvo-Fo...it-rear-axle-clutch-3-generation/173880227774

Arctic2 said:

Hi Richard.
What year is the FL2 does it have the Haldex 3 gen or Heldex 4gen fitted either way the service of oil & filter can be done at home of ramps, or you could take it to these guys below.
http://www.bellengineering.co.uk/freelander-2-products/

If taking the job on your self then you can get oil & filter from here. remembering to state which Haldex gen you have.
https://www.ebay.co.uk/itm/Volvo-Fo...it-rear-axle-clutch-3-generation/173880227774

Click to expand...

Hi and thanks for reply.
2010 is the year so looking at Bell's site it must be a Haldex 4.
Might just buy from Bell as not too far away, and thanks for confirming that DIY is an option, really dont know what the dealer actually did, just stated new pump fitted, suppose that should involve new oil and filter but DIY gives peace of mind!