Grinding and amber warning light when turning at speed

As the title, I am getting a grinding noise and a jolting movement and then the amber warning light flashes when travelling around bends.
My brake pads were a bit low so I decided to change them but this has not worked.

Could someone tell me what sort of problem I have?

Thanks in advance.

Have you checked wheel bearings, is the amber warning light ABS.

+1

Carrington224 said:

Have you checked wheel bearings, is the amber warning light ABS.

Click to expand...

Have not checked wheel bearings and it is the ABS amber light.

Does yours have the active cornering roll bar system?? If so check the oil level quick!!

ACE level next to your power steering fluid

Monkey13 said:

Does yours have the active cornering roll bar system?? If so check the oil level quick!!

Click to expand...

Got no idea, how would I tell if its the cornering roll bar system?

I cannot see another reservoir next to the power steering reservoir.

That's how you can tell with the two caps

Ok, I think I have found the problem.
Button on the dash DSC ( drivers stability control) this is always on from start up.
Turning the DSC off stopped the noise and juddering when turning.

But why has this just decided to happen, something has triggered it?

Thanks

KIAC said:

Ok, I think I have found the problem.
Button on the dash DSC ( drivers stability control) this is always on from start up.
Turning the DSC off stopped the noise and juddering when turning.

But why has this just decided to happen, something has triggered it?

Thanks

Click to expand...

DSC is a safety system that operates via the ABS braking system.

The first thing I would be doing is to check brake pads all round and replace as necessary.

Then I would be checking for any play in each of the 4 wheel bearings.


Dave

It's most likely play in the wheel bearings causing the sys to malfunction, get it sorted soon as or you will damage the system

The sensors are picking up wheel movement but as you corner the air gaps in the sensors will change giving false reading to the DSC it thinks your having too much fun and starts working and they do make some awful noise when they start to operate I think they make them sound like that to add to the drama if your having a wooooooow **** moment

Only just noticed in the title it's a disco 3 dohhhh!! Sorry thought disco 2 😑

caggiano said:

I can use larger head gaskets in order

Click to expand...

Seriously what the fcuk are you up to......9 posts all the same statement and on threads that make no sense?

Dr_evil said:

Seriously what the fcuk are you up to......9 posts all the same statement and on threads that make no sense?

Click to expand...

Spamming twunt, been banned about a dozen times now....I'm gonna go postal on their arse

blue beasty said:

Spamming twunt, been banned about a dozen times now....I'm gonna go postal on their arse

Click to expand...

His post made half sense on me 454 thread....then I noticed it on a light bar thread

tried to report it but by the time I pressed the button it said he was gone

Dr_evil said:

His post made half sense on me 454 thread....then I noticed it on a light bar thread

tried to report it but by the time I pressed the button it said he was gone

Click to expand...

It's always the same, first post makes sense then gets repeated all over.....always a ref to asda or asdas in their profile.

If I had something other than my phone I'd devote some time to chasing the ****er down:violent:

blue beasty said:

It's always the same, first post makes sense then gets repeated all over.....always a ref to asda or asdas in their profile.

If I had something other than my phone I'd devote some time to chasing the ****er down:violent:

Click to expand...

Can you ban the IP address itself then if he comes back next time you're on a computer ?

Dr_evil said:

Can you ban the IP address itself then if he comes back next time you're on a computer ?

Click to expand...

Proxys

Problem solved, noticed a rear tyre was slightly flat, pumped it up, sorted.
DSC button is on and working, all wheel bearings are fine.

you are quite observant/thorough on your weekly check then!