GENERAL GRABBER AT2 Tyres

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

CharlesY

Well-Known Member
Posts
7,084
Location
BANNED
I fitted a set of four of these to my Disco TD5 today.

Excellent in the snow and slush so far.

Has anyone had a set of these for a long time? Do they last well?

All news and views welcomed.

CharlesY
 
All good news so far!

Was out again today on untreated deep-snowy roads, with the trailer full of logs .
The tyres were great. Stopping is impressive. It just sort of ... well ... stops!

CharlesY
 
Last edited:
had some AT2s fitted in aug 08 been to morocco and back and poland and back 3 times now and still have lots of life left!
 
I run 30 psi front, 40 psi rear when on-road...

Just changed to Grabber AT2's after BFG AT's. The BFG's were sold with around 5mm of tread left after 85000 miles!

The AT2's seem to be pretty comparable, and a lot cheaper - just hope they last as well as the BFG AT's...
 
Done 30,000 on mine so far just about getting to half worn, I also tow a lot. This is all mostly motorway work so they get hot and wear quicker, so i am impressed with them. compare this i had HP Wrangler road tyres that landrover put on the disco and i only got 7,000 out of them all four were as bald as a coot.
 
I,ve not been able to find anyone with Grabber AT2,s in stock !.
I,ve ordered a set of BFG,s instead.

It seems both have a good reputation.

Del.
 
Back
Top