Gears

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
border

border

Well-Known Member
Posts
3,517
Location
North East. UK
Now this probably Is a Stupid question, but its doing my head in.
Cant help thinking that I've put the clutch in Right. I'm sure before that I could get all gears with box just stood.
Put new clutch in and fitted to engine and now they wont go in properly, only seem to get 5th and reverse,
Engine and Box just stood on bare chassis not connected or anything.
 

Attachments

  • IMG_3800.JPG
    IMG_3800.JPG
    283.8 KB · Views: 46
Mine does it sometimes. It picks and chooses which gears it wants too, sometimes first and second, other times third and fourth.
 
mick 1986 said:
Mine does it sometimes. It picks and chooses which gears it wants too, sometimes first and second, other times third and fourth.
Click to expand...
So will it work Normal when everything's connected up and Engine running ?,so I don't have to take gearbox out again ??
 
border said:
Sorry James I meant to say it is just gearbox and engine connected to bare Chassis, no clutch or even bulkhead or anything back on yet,
Click to expand...
it will do as you cant disengage the clutch by pressing the pedal,try selecting other gears whilst turning or turn it over a little then try a gear
 
You must log in or register to reply here.

Similar threads

dag019
LT77 clicking loudly in 5th gear
Replies
7
Views
970
Skolmate
Skolmate
G
Land Rover 300tdi clutch not disengaging after engine out
Replies
8
Views
2K
miktdish
miktdish
T
Gear selection problem
Replies
3
Views
942
miktdish
miktdish
S
how to test the gearbox
Replies
6
Views
1K
boguing
boguing
Skolmate
Defender 200tdi LT77 noise and rebuild
Replies
13
Views
1K
dag019
dag019
Back
Top