gear box help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

roger1966

New Member
Posts
30
Location
dudley west mids uk
hi all my 300 tdi gear box has lost all drive i can selact the gears but when letting out the clutch all i get is a grinding and knocking noise the RAC got me of the side of dinas mawddwy in north wales . what i need to know is it worth having a go at doing it my self , or do an exchange box or have mine re built funds are low so i need the most cost efective way to repaire please help thanks roger
 
Hi,Roger 1966. Did the RAC geezer say it was the gear box or clutch?or not sure . If gear box see related info on here .Same for clutch. Otherwise check out ask a mechanic .Try engine section have'nt looked lately but worth a look.
 
Hi,and ouch if it is the shaft,but you should be able to sort it out one way or another, or as you say, recon box but hunt around for best prices.Hope you find what you are looking for .:) Good point red hand.
 
hi all just sent my gear box to be fixed the guy says theres nothing wrong with it so i have removed the clutch plate can some one just conferm that the center spline should not spin on the inside of the plate bit confused now please help.....
 
get a new clutch, friction plate splines should be smooth sliding fit-if it's sloppy as hell the input shaft will be knackered
 
hi just to let the guys that gave me the info sent my box in to be done it was fine just 40 quids worth of work the center of th clutch had broken out thanks to you all by the way found a great transmition guy whitehouse and son at half penny gree air port in the midlands loads of info and not ripped off .
 
Back
Top