Galvanised chassis (again)

http://www.ebay.co.uk/itm/Land-Rove...715829?hash=item1a332cadf5:g:duUAAOSwyWZZPSLr

Anybody got one from these? is it a bit too cheap compared to Marsland / Richards? Thanks in advance for any opinions

Hi,

Someone was talking about these the other week. iirc they are based in Ireland.

Will have a look to see if anyone came back to them.

Cheers

This is the only other time I have heard them mentioned.

Might be worth dropping the OP a line to se if he found out any more?
https://www.landyzone.co.uk/land-rover/110-galvanised-chassis-time.317931/#post-4037258

Cheers

Sorry Neilly just noticed these are only selling Shielder chassis and are based in Exeter. Shielder are based in N. Ireland

Are they part of the shielder company or just reselling?

Something like that I would rather go direct in case of problems.

So, have you investigated into the 90 further and found it is worse or better than you thought? I assume it is not good if you are looking at Chassis.

Cheers

As far as i can make out they're just selling. I agree with you about buying direct

Rear x member rotten through & patched up to rear spring seats, rotten round rear shock mount on seat fail side, lots of plates all over chassis (worryingly one plate has "bosal" stamped on it, at least it had a decent silencer at some point) Gearbox x member welded in place. Just generally $hitty all over. Was intending to do it next summer anyway. Just have to bite the bullet and do it earlier.

Mate I bought a Marsland chassis, and literally everything was PERFECT! No drilling out galv or re-tapping threads, all done for you. And no distortion at all, everything fitted perfectly! Would highly recommend!

As above I got a Marsland chassis and it was perfect and even better due to someone cancelling I got it delivered within a week