Galvanised Chassis 90 300tdi question.

A

Andy Sargeant

Guest

• Apr 2, 2005

• #1

A few of you must have fitted a 90" 300TDI chassis, who in your opinon makes
the best ?????
Would like to know what problems you have had, if any and what make you
used.
Thanks in anticipation
Andy.
P.S. Has anyone used the Britpart supplied chassis ???

 

A

Andy Sargeant

Guest

• Apr 2, 2005

• #2

Sorry I forgot to mention that I only need info on "Galvanised" chassis
"Andy Sargeant" <[email protected]> wrote in message
news:[email protected]...
> A few of you must have fitted a 90" 300TDI chassis, who in your opinon
makes
> the best ?????
> Would like to know what problems you have had, if any and what make you
> used.
> Thanks in anticipation
> Andy.
> P.S. Has anyone used the Britpart supplied chassis ???
>
>

 

W

William MacLeod

Guest

• Apr 2, 2005

• #3

Andy Sargeant wrote:

> A few of you must have fitted a 90" 300TDI chassis, who in your opinon
> makes the best ?????
> Would like to know what problems you have had, if any and what make you
> used.

Richard's Chassis - well made, holes reamed out to correct diameter, excess
galv cleaned well etc. Delivery pries reasonable for myself as well.

> P.S. Has anyone used the Britpart supplied chassis ???

Nope. Ask them who makes them for them - doubt if they make them
themselves.

Regards

William MacLeod

 

A

Andy Sargeant

Guest

• Apr 4, 2005

• #4

Many thanks, "Britpart" will not give out the info, but through the
"grapevine" so to speak have found out that it's A.O.K. to use "BRITPART"
for chassis if you get my drift, thanks again, they do look very good and it
all fits back together O.K.
"William MacLeod" <[email protected]> wrote in message
news:[email protected]...
> Andy Sargeant wrote:
>
>> A few of you must have fitted a 90" 300TDI chassis, who in your opinon
>> makes the best ?????
>> Would like to know what problems you have had, if any and what make you
>> used.
>
> Richard's Chassis - well made, holes reamed out to correct diameter,
> excess
> galv cleaned well etc. Delivery pries reasonable for myself as well.
>
>> P.S. Has anyone used the Britpart supplied chassis ???
>
> Nope. Ask them who makes them for them - doubt if they make them
> themselves.
>
> Regards
>
> William MacLeod

 

B

Badger

Guest

• Apr 5, 2005

• #5

"Andy Sargeant" <[email protected]> wrote in message
news:[email protected]...
> Many thanks, "Britpart" will not give out the info, but through the
> "grapevine" so to speak have found out that it's A.O.K. to use "BRITPART"
> for chassis if you get my drift, thanks again, they do look very good and
> it all fits back together O.K.
> "William MacLeod" <[email protected]> wrote in message
> news:[email protected]...
>> Andy Sargeant wrote:
>>
>>> A few of you must have fitted a 90" 300TDI chassis, who in your opinon
>>> makes the best ?????
>>> Would like to know what problems you have had, if any and what make you
>>> used.
>>
>> Richard's Chassis - well made, holes reamed out to correct diameter,
>> excess
>> galv cleaned well etc. Delivery pries reasonable for myself as well.
>>
>>> P.S. Has anyone used the Britpart supplied chassis ???
>>
>> Nope. Ask them who makes them for them - doubt if they make them
>> themselves.
>>
>> Regards
>>
>> William MacLeod

You could also contact Marsland, it used to be the case that they didn't
advertise all the chassis due to contractual agreements with landrover -
Marsland manufactured chassis under licence for landrover (they maybe still
do, I don't know), so what you got was a genuine parts chassis that had been
dipped. That's what my 110 has, a few holes needed reaming out, but
otherwise a perfect fit.
Badger.

 

N

ninety

Guest

• Apr 7, 2005

• #6

Badger wrote:
> "Andy Sargeant" <[email protected]> wrote in message
> news:[email protected]...
>
>>Many thanks, "Britpart" will not give out the info, but through the
>>"grapevine" so to speak have found out that it's A.O.K. to use "BRITPART"
>>for chassis if you get my drift, thanks again, they do look very good and
>>it all fits back together O.K.
>>"William MacLeod" <[email protected]> wrote in message
>>news:[email protected]...
>>
>>>Andy Sargeant wrote:
>>>
>>>
>>>>A few of you must have fitted a 90" 300TDI chassis, who in your opinon
>>>>makes the best ?????
>>>>Would like to know what problems you have had, if any and what make you
>>>>used.
>>>
>>>Richard's Chassis - well made, holes reamed out to correct diameter,
>>>excess
>>>galv cleaned well etc. Delivery pries reasonable for myself as well.
>>>
>>>
>>>>P.S. Has anyone used the Britpart supplied chassis ???
>>>
>>>Nope. Ask them who makes them for them - doubt if they make them
>>>themselves.
>>>
>>>Regards
>>>
>>>William MacLeod
>
>
> You could also contact Marsland, it used to be the case that they didn't
> advertise all the chassis due to contractual agreements with landrover -
> Marsland manufactured chassis under licence for landrover (they maybe still
> do, I don't know), so what you got was a genuine parts chassis that had been
> dipped. That's what my 110 has, a few holes needed reaming out, but
> otherwise a perfect fit.
> Badger.
>
>
I bought a second hand 300tdi chassis from a 1999 defender - IMO the
steel used on the originals is thicker than many of the 3rd party
manufacturers.

Colin

 

N

ninety

Guest

• Apr 7, 2005

• #7

ninety wrote:
oops - should have trimmed that!

>>
> I bought a second hand 300tdi chassis from a 1999 defender - IMO the
> steel used on the originals is thicker than many of the 3rd party
> manufacturers.
>
> Colin

 

A

Austin Shackles

Guest

• Apr 7, 2005

• #8

On or around Thu, 07 Apr 2005 00:31:56 +0100, ninety <[email protected]>
enlightened us thusly:

>ninety wrote:
>oops - should have trimmed that!
>
>>>
>> I bought a second hand 300tdi chassis from a 1999 defender - IMO the
>> steel used on the originals is thicker than many of the 3rd party
>> manufacturers.
>>
>> Colin

ISTR reading somewhere that LR chassis were 14 gauge, which is about 2mm.

--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
If all be true that I do think, There are five reasons we should drink;
Good wine, a friend, or being dry, Or lest we should be by and by;
Or any other reason why. - Henry Aldrich (1647 - 1710)