fuel burn heater sensor
- Thread starter leeh1306
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
) where the sensor for the fuel burn heater is on a facelift, much appreciated.
KEITHBRADLEY17
Member
- Posts
- 40
- Location
- Northumberland
It is be hind the front bumper On the drivers side
ronjonjim
New Member
- Posts
- 6
- Location
- Clifton Campville Staffordshire
It's behind the front bumper bolted to the front crossmember. You'll need to remove the bumper for access.
Arctic2
Well-Known Member
- Posts
- 2,446
- Location
- Westmidlands
Larahausp1
Member
- Posts
- 88
- Location
- Halesowen
How do they fit in? I can see sensor i was wondering if i could just cut some of the mesh out? All where is cheapest place to buy one? i cant find it on ebay or anywhere. Mine is coming on when outside temp is 10plus and when engine is warm
Arctic2
Well-Known Member
- Posts
- 2,446
- Location
- Westmidlands
Code is JWL000020 couple of links below for you.
https://www.famousfour.co.uk/new_parts/lr_part?part=388405
http://www.brit-car.co.uk/search.ph..._type=&xSupplierID=&product-sort=&xPerPage=10
https://www.rimmerbros.co.uk/Item--i-JWL000020
https://www.famousfour.co.uk/new_parts/lr_part?part=388405
http://www.brit-car.co.uk/search.ph..._type=&xSupplierID=&product-sort=&xPerPage=10
https://www.rimmerbros.co.uk/Item--i-JWL000020
Larahausp1
Member
- Posts
- 88
- Location
- Halesowen
Ok thanks does it just plug in? And would it be possible to change via mesh grill
Devilish
Well-Known Member
- Posts
- 202
- Location
- Cannock Staffordshire
You do not want to go messing up your grille mesh, it is a bumper off job, but it is your grille mesh, you have a PM
Last edited:
