front upper@lower bal ljoint change

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
R

redrrover

Member
Posts
37
hi is there any measurements to line drive shafts up after fitting four new joints . i are doing a referb axle to put on cheers Pete
 
redrrover said:
hi is there any measurements to line drive shafts up after fitting four new joints . i are doing a referb axle to put on cheers Pete
Click to expand...


I have read on here that if using oem ball joints you will be fine as long as you do not disturbed the adjustment collar on the hub
 
When I did mine I just centred the washer on drive shaft with axle case,been fine since,the seal seems pretty flexible anyway,put grease on inner lip off seal before assembly as well .
 
You must log in or register to reply here.

Similar threads

nevillen
L322 lower suspension arm replacement
Replies
8
Views
1K
Shippers
Shippers
C
Front Drive Shaft CV/Gator boot
Replies
4
Views
601
htr
htr
currymunster
Disco 1 Front shocks
Replies
16
Views
1K
frostythor
frostythor
A
Air suspension problems
2
Replies
30
Views
2K
Alec1943
A
Paddy78
'07' L322 needing front air bags
Replies
5
Views
499
Paddy78
Paddy78
Back
Top