Front RANGE ROVER decals
- Thread starter alexkeogh
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Try a hairdryer and strong nylon fishing line to "Break" the adhesive, working the line between the decal and bonnet/tailgate.
Alternatively, your local bodyshop will have them off in a few minutes.
Alternatively, your local bodyshop will have them off in a few minutes.
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
alex have you got your rr back j
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
i just used a hairdryer,get the decals fairly warm and they should just peel off.
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
drive in to a wall, they come off pretty easy that way!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
trust you gav,duz wurk tho
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
it also takes lights, grill and bumper off! easy peasy!!!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
gav get a grip he only wants the decals of,ffs.:doh:
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
i got solutions for panel removing too!!!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
wots them then gav
al-one-arm
Well-Known Member
- Posts
- 409
- Location
- burnham-on-sea,somerset
hydrochloric acid?
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
lump ammer fer me
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
nah, you know them barriers on the motorway?? just slide along one of them, eventually you'll come to a joint and it should grip the panel and take it straight off! obviously you have to decide which direction to drive in for best effect!
roof panel, set your suspension to its highest and go to mcdonalds(or other suitable fast food outlet) and attempt the drive through or council car parks if the panel is stubborn as they are usually concrete!
ball joints come off eaisly on low suspension on the railway tracks, this also applies to other stubborn item beneath the car, its worth doing this first as you can also get decals, bumpers, lights etc off if you time it for the next intercity train!!
if you want the passenger side glass out just open the door when a cyclist is nearby, use a bus lane for the drivers side and hopefully a bus will help out!!!
roof panel, set your suspension to its highest and go to mcdonalds(or other suitable fast food outlet) and attempt the drive through or council car parks if the panel is stubborn as they are usually concrete!
ball joints come off eaisly on low suspension on the railway tracks, this also applies to other stubborn item beneath the car, its worth doing this first as you can also get decals, bumpers, lights etc off if you time it for the next intercity train!!
if you want the passenger side glass out just open the door when a cyclist is nearby, use a bus lane for the drivers side and hopefully a bus will help out!!!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
gav u been smokin or summat.
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
nah, thats how they do it in india!!!
if yer gonna do roof panel you might aswell do boot lid too at mcdonalds, just open it and reverse!
if yer gonna do roof panel you might aswell do boot lid too at mcdonalds, just open it and reverse!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
but u is in rovrem gav
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
plenty of em here!
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
not ere tho,just the takeaways thass all
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
an taxis!
