Series 2 Front radiator panel

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Trumar

Active Member
Posts
119
Location
Hemel Hempstead
Hello I have a Series 2a swb 1971, I have had to replace the front radiator panel. When I removed the knackered original radiator pane. The panel was only held on by the nuts and bolts down both sides of the inner wings. There is no fixings on the bottom of the radiator panel. Can someone please help with a step by step schematics of how and what fittings I need please.
 
Do a web search for smithies landrover brings up a NZ web site of interest.
This is series 3 but quite sure same setup series 2 through to 3.
 

Attachments

  • rad panel.JPG
    rad panel.JPG
    43.9 KB · Views: 146
Yes series 2 the same as 3,Three bolts one in each corner of lower radiator panel and one in the center fitted to brackets on the chassis.Thin rubber pad between them.
 
Hello I have a Series 2a swb 1971, I have had to replace the front radiator panel. When I removed the knackered original radiator pane. The panel was only held on by the nuts and bolts down both sides of the inner wings. There is no fixings on the bottom of the radiator panel. Can someone please help with a step by step schematics of how and what fittings I need please.
Do a web search for smithies landrover brings up a NZ web site of interest.
This is series 3 but quite sure same setup series 2 through to 3.
Do a web search for smithies landrover brings up a NZ web site of interest.
This is series 3 but quite sure same setup series 2 through to 3.
Nice one Blackburn I will have a look. I have been looking in Internet but all I could find was people repairing front radiator panels. So cheers for the info.
 
Yes series 2 the same as 3,Three bolts one in each corner of lower radiator panel and one in the center fitted to brackets on the chassis.Thin rubber pad between them.
Hello Tottot, is there a parts firm you use that do all the fittings I need for this panel?
 
Back
Top