freelander

hi all,
I've got a Freelander 2 10 plate with a brake problem. started the other day, when braking the brake pedal went soft and went to the floor, brakes still working though. I could pump the pedal and the brakes would come back up but then go down as I kept the pressure on the pedal. no sign of any leaks so I thought it must be the master cylinder, changed it and bled the brakes but although better the pedal is still traveling to the floor. any ideas?

Hello and welcome
You may want to post over in the freelander section of the forum to get answers
https://www.landyzone.co.uk/forum/land-rover-freelander.9/

granddad said:

hi all,
I've got a Freelander 2 10 plate with a brake problem. started the other day, when braking the brake pedal went soft and went to the floor, brakes still working though. I could pump the pedal and the brakes would come back up but then go down as I kept the pressure on the pedal. no sign of any leaks so I thought it must be the master cylinder, changed it and bled the brakes but although better the pedal is still traveling to the floor. any ideas?

Click to expand...

Welcome.
This is the Range Rover technical section.
Your first port of call should be to the introduction section. Where you , as a new member, tell us a little about you and your vehicle, and maybe share some piccies of your vehicle. It appeases the natives . Which is nice, and establishes a community feeling in new members. Rather than the smash and grab approach for advice, in a first post.
Technical advice can be found in the relevant forum. Yours being the Freelander section.

Thanks for your advice and guidance